Automatic Recycling Sand Blasting Room
Sand blasting booths is a closed space, includes blasting system, abrasive circulatory system and rust removal system, etc. Sand blasting booths is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts. Through the shot blasting can remove the complex work piece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the work piece surface to be bright and clean, simultaneously reduce the work piece internal stress, enables the work piece surface to obtain the strengthening, thus achieves enhances the work piece surface and the intrinsic quality goal.
|1||Improve the corrosion resisting ability of machinery products and metal materials.|
|2||Improve bonding strength of steel surfaces and coatings.|
|3||Increase the anti-fatigue capability of metal products and extend its life.|
|4||Optimize the craftwork state of steel surface.|
|5||Greatly enhance the efficiency of cleaning.|
|6||Reduce the labor intensity of cleaning works.|
|7||Reduce the environment pollution.|
structural character of equipment:
A: As following is equipment structural character:
1. Sand blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.
2. Bucket Elevator
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.
4. Abrasive recycling system
This machine adopts the patented shot valve produced of our company; it can accumulate a certain time in blasting, through the manual control to provide the shot ball to the blasting device.
5. Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
6. Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.